Welcome to the offical website of Atekon Automation Technology Co.,Ltd
/
Log out
   EnterpriseCRM   丨    OA丨    Enterprise email丨     CN丨     EN

CN  丨  EN

这是描述信息
这是描述信息
南大傲拓科技江苏股份有限公司
Homepage
/
Product Center
/
PLC
/
General PLC
/
NA400 medium and large PLC
/
NA400-communication expansion module
/
NA400-Profibus DP master module

Product

All categories
搜索
Search

  • NAProSetupV606.rar

  • NAProSetupV580.rar

  • NA400PLCUserManual(V27）.rar

  • NA400PLC.rar
NA400-Profibus DP master module
0.0 元 0.0 元
NA400-communication expansion module

Model

CMM401-0102

Order number

400CMM4010102

Power consumption

3.0W/5V

Current consumption

600mA/5V

Number of communication ports

1

Interface Type

RS485

Support pass baud rate

9.6~12000kbps

Maximum number of sites per end

32

Maximum number of sites per network

126

Programming Drive

Programmable

Weight

250g

Dimensions (W×H×D) (mm)

40×145×158

*The information provided in this article is just a general description and feature introduction of the product. The content in this article may change with the further development of the product, and the right of interpretation belongs to Nanda Automation Technology Co., Ltd.

Product description
Parameters
Performance parameters
Download

Profibus DP master module

CMM401-0102

 

 

Features

Complete communication tasks independently, only complete data exchange with the CPU, and do not occupy CPU resources.
 
 
The data exchange with the CPU module uses a single internal network, which is separated from the internal network of the I/O module to reduce the burden of internal network communication.
 
Number of communication nodes: maximum 126, addresses 0~125.
The intelligent module has a self-diagnosis function, and can automatically reset and restart when the module fails.
No need to set the hardware, the CPU module automatically loads the parameters after startup;
Support hot swap.

 

 

Module hardware settings and external interfaces

1. Debug serial port

The module provides an RS232 serial port with RJ45 interface, through which the module can be downloaded and configured.

模块

 

2. Communication interface

The module uses DB9 hole connector and RS485 interface for external communication.

 

模块

 

*The information provided in this article is just a general description and feature introduction of the product. The content in this article may change with the further development of the product, and the right of interpretation belongs to Nanda Automation Technology Co., Ltd.

Scan the QR code to read on your phone
We could not find any corresponding parameters, please add them to the properties table

Model

CMM401-0102

Order number

400CMM4010102

Power consumption

3.0W/5V

Current consumption

600mA/5V

Number of communication ports

1

Interface Type

RS485

Support pass baud rate

9.6~12000kbps

Maximum number of sites per end

32

Maximum number of sites per network

126

Programming Drive

Programmable

Weight

250g

Dimensions (W×H×D) (mm)

40×145×158

*The information provided in this article is just a general description and feature introduction of the product. The content in this article may change with the further development of the product, and the right of interpretation belongs to Nanda Automation Technology Co., Ltd.

Previous
NA400-Profibus DP slave module
Next
NA400-RS485 serial communication module

底部二维码

Time of issue:2020-06-24 00:00:00

Welcome to Atekon 

Technology official Wechat

底部联系方式

Time of issue:2020-06-24 00:00:00

Address: Floor8,BuildingD,Cloud Security City,No.19 Ning shuang Road,Yuhuatai District,Nanjing

Production Center: No. 219 Qingshuiting West Road, Jiangning District, Nanjing City

Telephone: 025-68530188 (Switchboard)

Fax: 025-68530178

Service Hotline: 400-025-0150

Technical support: 025-68530179

底部备案号

Time of issue:2020-06-22 00:00:00

Atekon Technology Co.,Ltd    Record number: 苏ICP备09042342号-1