Log In | Enterprise CRM | Corporate Email
The NJ400CT module connects to the pre-wired backplane.
- Product Description
- Performance Parameters
-
The NJ400CT module connects to the pre-wired backplane.
DIM401-3201CT module connection method with pre-wired backplane >>>
Model
DIM401-3201CT
Power consumption
Backplane bus
Power consumption35-70mA
2.2VNumber of input channels
32
Number of channels per group
16
Signal Input Type
Leakage type
Signal input voltage
Rated value
“0” signal
“1” signal24VDC
-30~5V
11~30VTypical input current “1” signal
6mA
Maximum input latency
“0”~“1”
“1”~“0”
0.5mA
0.5mA
Supports diagnostics
√
Input filtering
√, can be set
Insulation testing
500VDC
Isolation
Between channels
Channel and Backplane
√
√, optoelectronic isolation
Weight (g)
400
Width x Height x Depth (mm)
40x145 x162
Connection method between DOM401-1601CT module and pre-wired backplane >>>
Connection method between the DOM401-3201CT module and the pre-wired backplane >>>
Model
DOM401-1601CT
DOM401-3201CT
Power consumption
Backplane bus
Power consumption35-70mA
2.8W35-70mA
3.2WDigital output
Number of input channels
Number of channels per group
Type
Output short-circuit protection18
8
Transistor
√32
16
Transistor
√Output voltage
“1” signal
24VDC
24VDC
Output current
“1” Signal Rating
0~40℃ minimum allowable
Maximum allowable from 0 to 40℃0.5A
5mA
0.6A0.5A
5mA
0.6ASwitching frequency
Resistive load
Inductive load100Hz
0.5Hz100Hz
0.5HzSupports diagnostics
√
√
Insulation testing
500VDC
500VDC
Isolation
Between channels
Channel and Backplane√
√, optoelectronic isolation√
√, optoelectronic isolationWeight (g)
300
350
Width x Height x Depth (mm)
40x145x162
40x145x162
AIM401-1601CT Module Connection Method with Pre-Wired Backplane >>>
Model
AIM401-1601CT
Power consumption
Backplane bus
Power consumption35-70mA
2.6WAnalog input
Number of channels
Signal input format
Enter the maximum allowed value16
Single-ended
25mAOutput voltage
0~10mA, 0~20mA, 4~20mA
0~5V, 1~5V
5~5V, 0~10V, -10~10V√
-
-Output current
A/D bit depth
Conversion time6
1 ms/channelError accuracy
0.1%
Sensor
Two-wire system
4-wire system
√
√
Supports diagnostics
√
Insulation testing
√
Weight (g)
350
Width × Height × Depth (mm)
40 x 145 x 162
*The information provided in this text is merely a general description and introduction to the product’s features. The content of this document is subject to change as the product undergoes further development. The right of interpretation rests with Aotuo Technology Co., Ltd.
Related Downloads
Related Products
Product Inquiry
Service hotline:+8618905163737
Company Headquarters: No. 15, Building B, Zone B, Phase I, Headquarters Economic Park, 69 Fengzhan Road, Yuhuatai District, Nanjing, Jiangsu, P.R. China
Production Center: No. 219 Qinghuiting West Road, Jiangning Economic Development Zone, Nanjing City, Jiangsu Province
Aoto Technology Co., Ltd.
