Log In | Enterprise CRM | Corporate Email
NA400-DeviceNet Master Module
Category:
- Product Description
- Performance Parameters
-
DeviceNet Master Module
CMM401-0106
Product Features
Independently complete communication tasks, with the CPU only performing data exchange and not consuming CPU resources.
The data exchange with the CPU module uses a dedicated internal network, which is separate from the internal network used by the I/O modules, thereby reducing the load on the internal network communication.
Number of communication nodes: Up to 64, with support for up to 63 DeviceNet slave nodes;
Supports standard baud rates: 125 kbps, 250 kbps, 500 kbps;
Supports sending explicit messages via PLC ladder diagrams to read/write slave station data;
It automatically exchanges data with the PLC host module; users only need to program the relevant registers of the PLC.
Provide a space with a definable number of bytes as the I/O input data area and the output data area;
Smart module with self-diagnostic function; when a fault occurs during module operation, it can automatically reset and restart itself.
Supports online removal and installation of slave devices without disconnecting the network;
Comprehensive LED indicator function;
Configuration parameters are not lost when power is off; upon power-up, the CPU automatically loads the parameters.
Connection of self-powered DeviceNet devices compatible with the network;
Supports hot-swapping.
*The information provided in this text is merely a general description and introduction to the product’s features. The content of this document may change as the product undergoes further development. The right of interpretation rests with Nanjing Aotuo Technology Co., Ltd.
-
Model
CMM401-0106
Order number
400CMM4010106
Power consumption
3.0W/5V
Current consumption
600mA/5V
Number of communication ports
1
Interface Type
5-pin open-type DeviceNet connector (5.08mm), CAN interface
Supported baud rates
125 kbps, 250 kbps, 500 kbps
Information type
I/O polling, explicit
Maximum number of sites per network
64 (including 1 main station)
Programming-driven
Programmable
Weight (g)
250
Dimensions (Width × Height × Depth) (mm)
40×145×158
*The content of this document is subject to change as the product undergoes further development. The right of interpretation rests with Aotuo Technology Co., Ltd.
Related Downloads
Related Products
Product Inquiry
Service hotline:+8618905163737
Company Headquarters: No. 15, Building B, Zone B, Phase I, Headquarters Economic Park, 69 Fengzhan Road, Yuhuatai District, Nanjing, Jiangsu, P.R. China
Production Center: No. 219 Qinghuiting West Road, Jiangning Economic Development Zone, Nanjing City, Jiangsu Province
Aoto Technology Co., Ltd.
