NA2000 - Temperature Input Module
Category:
- Product Description
- Performance Parameters
-
Temperature input module
The NA2000 series temperature input expansion module is used to connect resistance thermometers or thermocouple sensors.
Technical Performance Indicators
Up to 4-channel temperature probe input;
The thermistor type setting for each channel is optional;
Measurement method for each channel: RTD or thermocouple;
Wiring methods: two-wire system, three-wire system;
Smart module with self-diagnosis function; when a fault occurs during module operation, it can automatically reset and restart itself.
No hardware configuration is required; after startup, the CPU module automatically loads its parameters.
*The information provided in this document is intended solely as a general description and introduction to the product’s features. The content herein may be subject to change as the product undergoes further development; the right of interpretation rests with Aoto Technology Co., Ltd.
-
Model
AIM2001-0203
AIM2001-0403
AIM2001-0204
AIM2001-0404
Input characteristics
Input channel
2 o'clock
4 o'clock
2 o'clock
4 o'clock
Signal type
Pt100, Pt1000, Ni1000
Cu50, Cu53, Cu100
Pt100, Pt1000, Ni1000
Cu50, Cu53, Cu100
S, T, R, E, N, K, J
S, T, R, E, N, K, J
Data format
The actual value is multiplied by 10.
The actual value is multiplied by 10.
The actual value is multiplied by 10.
The actual value is multiplied by 10.
Sensor
2 lines
Support
Support
Support
Support
3-line
Support
Support
-
-
Performance parameters
Module refresh cycle
200ms
300ms
200ms
300ms
Common-mode rejection ratio
120dB
120dB
120dB
120dB
Temperature drift
±100 ppm/℃
±100 ppm/℃
±100 ppm/℃
±100 ppm/℃
Physical properties
Size specifications
25mm × 90mm × 75mm
25mm × 90mm × 75mm
25mm × 90mm × 75mm
25mm × 90mm × 75mm
Weight
100g
100g
100g
100g
Power consumption
1W
1W
1.5W
1.5W
Operating temperature
-10℃ ~ +55℃
-10℃ ~ +55℃
-10℃ ~ +55℃
-10℃ ~ +55℃
Storage temperature
-40℃ ~ +70℃
-40℃ ~ +70℃
-40℃ ~ +70℃
-40℃ ~ +70℃
Relative humidity
5% to 95% (no condensation)
5% to 95% (no condensation)
5% to 95% (no condensation)
5% to 95% (no condensation)

*The information provided in this document is intended solely as a general description and introduction to the product’s features. The content herein may be subject to change as the product undergoes further development, and the right of interpretation rests with Aoto Technology Co., Ltd.
Related Downloads
Related Products
Product Inquiry




